2015 Chevrolet Colorado BaseFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 3.00 OZS. 0.08 L PAG 46 S
Air Cond Refrigerant 1.75 LBS. 0.79 KG R-134a S
Automatic Transmission Fluid Complete Trans System 11.20 QTS. 10.59 L Automatic Transmission Fluid DEXRON VI S
Automatic Transmission Fluid Overhaul 9.80 QTS. 9.27 L Automatic Transmission Fluid DEXRON VI S
Automatic Transmission Fluid Pan Removal and Filter Replacement 6.70 QTS. 6.34 L Automatic Transmission Fluid DEXRON VI S
Brake Fluid N/A N/A DOT 3 Hydraulic Brake Fluid S
Differential Gear Oil 8.0" Rear Axle 3.00 PTS. 1.41 L SAE 75W-90 Gear Oil GM Part No. 88863089. S
Differential Gear Oil 8.6" Rear Axle 3.20 PTS. 1.51 L SAE 75W-90 Gear Oil GM Part No. 88863089. S
Differential Gear Oil Front 2.70 PTS. 1.27 L SAE 75W-90 Gear Oil GM Part No. 88863089. S
Engine Coolant 2.5L Eng 9.61 QTS. 9.09 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Oil 2.5L Eng w/Filter 5.00 QTS. 4.73 L API - SAE 5W-20 Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. SAE 5W-20 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. S
Fuel Tank 21.00 GALS. 79.49 L S
Manual Transmission Fluid 3.17 QTS. 2.99 L Automatic Transmission Fluid DEXRON VI S
Transfer Case Fluid 2.00 QTS. 1.89 L Automatic Transmission Fluid DEXRON VI S
Windshield Washer Fluid N/A N/A Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. Use only fluid that meets regional freeze protection requirements. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.