SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2014TRAVERSE LT, 4D UTILITYREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 102 (OBJECT DETECTION AND PEDESTRIAN PROTECTION SYSTEM)REPAIR INSTRUCTIONSFRONT VIEW CAMERA REPLACEMENT
2014 Chevrolet Traverse LT, 4D Utility

Front View Camera Replacement

2014 Chevrolet Traverse LT, 4D UtilitySECTION Front View Camera Replacement
WARNING: This page is about a different car, the 2015 GMC Acadia, 2015 Chevrolet Traverse, and 2015 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front View Camera
GM3975606Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the inside rearview mirror mount plate cover. Refer to Inside Rearview Mirror Mount Plate Replacement .
1 Front View Camera

Procedure

  1. Using a suitable plastic tool, insert the tool between the edge of the front view camera retainers, turn the tool to release the retainers and the camera and rotate downward.
  2. Disconnect the electrical connector.
  3. After replacement of the front view camera, program the front view camera. Refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.