2014 Chevrolet SSFACTORY OEM SERVICE PROCEDURE

Installation Procedure

    Fig 1: Identifying Ignition Coil To Ignition Coil Assembly Retaining Bolts
    GM1950822Courtesy of GENERAL MOTORS COMPANY
  1. Install the ignition coil assembly.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the ignition coil to ignition coil assembly retaining bolts (1) and tighten to 12 (106 lb in).
    3. Fig 2: Identifying Ignition Coil To Ignition Coil Wiring Harness Connectors
    GM1950818Courtesy of GENERAL MOTORS COMPANY
  3. Connect the ignition coil to ignition coil wiring harness connectors (1).
  4. Install the ignition coil assembly to the engine.
    5. Fig 3: Identifying Ignition Coil Assembly To Rocker Cover Retaining Bolts
    GM1950813Courtesy of GENERAL MOTORS COMPANY
  5. Install the ignition coil assembly to rocker cover retaining bolts (2) and tighten to 12 (106 lb in).
  6. Connect the main ignition coil harness connector (1) to the ignition coil assembly.
    7. Fig 4: Identifying Spark Plug Wires
    GM1950809Courtesy of GENERAL MOTORS COMPANY
  7. Connect the spark plug wires (1) to the ignition coils.
  8. Install the engine cover. Refer to Engine Cover Replacement .
  9. Connect the battery ground cable to the battery. Refer to Battery Negative Cable Disconnection and Connection .
  10. Connect the fuel injection fuel feed hose. Refer to Fuel Injection Fuel Feed Hose Replacement .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.