Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Chevrolet Traverse LTZ, FWDFACTORY OEM SERVICE PROCEDURE
Circuit/System Verification
- Place the transmitter on the test pad of the J 43241
keyless entry tester and press each transmitter button one at a time, holding each button for three seconds. The tester should sound a tone and illuminate a green light for the entire three second button press.
- If one or more buttons does not sound the tone and illuminate the green light for the entire three seconds, replace the transmitter battery and retest with the J 43241 keyless entry tester. If the condition continues after battery replacement, replace the transmitter.
- Program the transmitter. Refer to Remote Control Door Lock Transmitter Learn . The transmitter should successfully complete the programming procedure.
- If the transmitter does not program, replace the keyless entry transmitter. If the new keyless entry transmitter does not complete the programming, replace the RCDLR.
- Operate the transmitter function while observing the vehicle. The vehicle should perform each of the corresponding functions when selected on the transmitter.
- If any of the vehicle functions are inoperative, replace the keyless entry transmitter. If the functions remain inoperative after replacement of the transmitter, replace the RCDLR.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.