2013 Chevrolet Corvette Base, 2D Convertible, Standard Trans, Trans Mfr CD 6L85M/MM6FACTORY OEM SERVICE PROCEDURE

Circuit/System Testing

  1. Verify that there are no DTCs in the BCM.
    • If there are any DTCs in the BCM, diagnose those DTCs first.
  2. Ignition ON. Monitor the Park Switch (Auto) in the BCM Keyless/Remote Start Data with a scan tool. Shift the transmission range selector in and out of Park. Verify that the scan tool display changes between Active and Inactive.
    • If the Park Switch (Auto) does not change between Active and Inactive, test or repair the BCM park signal circuit.
  3. Ignition ON. Monitor the Column Lock Relay Signal in the Chassis Data with a scan tool. Shift the vehicle into Park and turn off the ignition. Verify that the scan tool display changes from Off to On.
    • If the BCM Column Lock Relay Signal does not change between OFF and ON, test or repair the steering column lock control circuit.
    • If the steering column lock control circuit is OK, test or replace the BCM.
  4. If all circuits test normal, replace the SCLCM.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.