2012 Chevrolet Traverse LS, AWDFACTORY OEM SERVICE PROCEDURE

Fastener Specifications

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Audio/Video Disc Player Adapter Screw 2 N.m 18 lb in
Front Floor Console Extension Accessory Upper Bezel Screws 2 N.m 18 lb in
Front Side Door Speaker Screw 2.5 N.m 22 lb in
Heater and A/C and Radio Control Module Screws 2 N.m 18 lb in
Radio Antenna Base Nut 9 N.m 80 lb in
Radio Front Floor Console Speaker Screws 9 N.m 80 lb in
Radio Front Speaker Screw 2.5 N.m 22 lb in
Radio Rear Quarter Trim Speaker Assembly Screw 2.5 N.m 22 lb in
Radio Speaker Amplifier Screw 2.5 N.m 22 lb in
Rear Side Door Speaker Screw 2.5 N.m 22 lb in
Video Display Assembly Screws 2 N.m 18 lb in
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.