2012 Chevrolet Sonic LS, 4D Hatchback, Automatic TransFACTORY OEM SERVICE PROCEDURE

Fuel Pressure Sensor Replacement

Fig 1: Fuel Pressure Sensor
GM2509422Courtesy of GENERAL MOTORS COMPANY
Fuel Pressure Sensor Replacement

Callout Component Name

Preliminary Procedure

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
1 Fuel Pressure Sensor
CAUTION:

Refer to Fastener Caution .


Tighten 
19 N.m(14 lb ft)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.