2012 Chevrolet Corvette Base, 2D Convertible, Automatic TransFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.00 OZS. 0.14 L PAG 46 S
Air Cond Refrigerant 1.10 LBS. 0.49 KG R-134a S
Automatic Transmission Fluid Complete Trans System 13.20 QTS. 12.49 L Automatic Transmission Fluid DEXRON VI S
Automatic Transmission Fluid Overhaul 12.50 QTS. 11.82 L Automatic Transmission Fluid DEXRON VI S
Automatic Transmission Fluid Pan Removal 6.50 QTS. 6.15 L Automatic Transmission Fluid DEXRON VI S
Brake Fluid N/A N/A DOT 3 Hydralulic Brake Fluid S
Clutch Fluid N/A N/A Use only DOT 4 Hydraulic Brake Fluid S
Differential Gear Oil Base 2.12 QTS. 2 L DEXRON LS Gear Oil S
Engine Coolant 6.2L Eng,Eng CD LS3 11.90 QTS. 11.26 L 50/50 mixture of DEX-COOL and clean, drinkable water After refill, the level must be checked. Add enough engine coolant so that the fluid is within the proper operating range. S
Engine Oil 6.2L Eng,Eng CD LS3 w/Filter,w/Z52 Dry Sump Oil System 10.50 QTS. 9.93 L API - SAE 5W-30 Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. S
Engine Oil 6.2L Eng,Eng CD LS3 w/Filter 6.00 QTS. 5.67 L API - SAE 5W-30 Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. S
Engine Oil 6.2L Eng,Eng CD LS3 w/o Filter 5.70 QTS. 5.39 L API - SAE 5W-30 Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. S
Fuel Tank 18.00 GALS. 68.13 L S
Manual Transmission Fluid Base 3.60 QTS. 3.4 L Manual Transmission Fluid GM Part No. 88861800. S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 89021184. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.