Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Chevrolet Camaro LS, Standard TransFACTORY OEM SERVICE PROCEDURE
K28 Headlamp Leveling Control Module (TR7)
Connector Part Information
|
Terminal Part Information
|
K28 Headlamp Leveling Control Module (TR7)
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| 1 | 0.5 RD/WH | 4340 | Battery Positive Voltage |
| 2 | 0.35 OG/BK | 5177 | Left Headlamp Leveling Motor 2 |
| 3 | 0.35 YE/BK | 5176 | Left Headlamp Leveling Motor 1 |
| 4 | 0.35 PU/WH | 5178 | Left Headlamp Leveling Motor 3 |
| 5 | 0.5 L-BU/BK | 5752 | Left Headlamp Leveling Motor Return |
| 6 | - | - | Not Used |
| 7 | 0.35 TN | 2501 | High Speed GMLAN Serial Data - |
| 8 | 0.35 TN/BK | 2500 | High Speed GMLAN Serial Data + |
| 9 | - | - | Not Used |
| 10 | 0.35 BN/WH | 5180 | Right Headlamp Leveling Motor 1 |
| 11 | 0.35 OG/WH | 5182 | Right Headlamp Leveling Motor 3 |
| 12 | 0.35 GY/BK | 5183 | Right Headlamp Leveling Motor 4 |
| 13 | - | - | Not Used |
| 14 | 0.35 GY | 5179 | Left Headlamp Leveling Motor 4 |
| 15-18 | - | - | Not Used |
| 19 | 0.35 TN | 2501 | High Speed GMLAN Serial Data - |
| 20 | 0.35 TN/BK | 2500 | High Speed GMLAN Serial Data + |
| 21-23 | - | - | Not Used |
| 24 | 0.35 PK/BK | 5181 | Right Headlamp Leveling Motor 2 |
| 25 | 0.5 BK | 1050 | Ground |
| 26-27 | - | - | Not Used |
| 28 | 0.35 PU/WH | 1211 | Right Front Strut Position Sensor Voltage Reference |
| 29 | 0.35 L-BU/BK | 1212 | Low Reference |
| 30 | 0.35 TN/WH | 1213 | Right Front Strut Position Sensor Signal |
| 31 | 0.35 OG/BK | 1208 | Left Rear Strut Position Sensor Signal |
| 32 | 0.35 L-GN/BK | 1209 | Low Reference |
| 33 | 0.35 L-GN/WH | 1210 | Left Rear Strut Position Sensor Voltage Reference |
| 34 | 0.35 L-BU | 5986 | Serial Data Communication Enable |
| 35 | 0.5 L-GN/BK | 5753 | Right Headlamp Leveling Motor Return |
| 36-38 | - | - | Not Used |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
