Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Chevrolet Camaro LS, Standard TransFACTORY OEM SERVICE PROCEDURE
Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Floor Console Fastener | 2.5 N.m | 22 lb in |
| Front Floor Console Rear Cover Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Assembly Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Carrier Support Bracket Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Compartment Door Dampener Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Compartment Door Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Compartment Door Latch Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Driver Knee Bolster Energy Absorber Fastener | 2.5 N.m | 22 lb in |
| Instrument Panel Inflatable Restraint Fasteners | 22 N.m | 16 lb ft |
| Instrument Panel Tie Bar Assembly to the Vehicle Body | 25 N.m | 18 lb ft |
| Instrument Panel Tie Bar Assembly to the Vehicle Cowl | 9 N.m | 80 lb in |
| Instrument Panel Tie Bar Assembly to the Windshield Frame and Plenum Panel | 22 N.m | 16 lb ft |
| Instrument Panel Trim Pad Fasteners | 2.5 N.m | 22 lb in |
| Instrument Panel Trim Plate Retainer Fastener | 2.5 N.m | 22 lb in |
| Instrument Tie Bar Assembly to the HVAC Module Assembly | 9 N.m | 80 lb in |
| Roof Console Fasteners | 2.5 N.m | 22 lb in |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.