SYS.OK|MANUAL.DB● LIVE
2012 Chevrolet Camaro LS, Automatic Trans

Quick Lookups: Fluids

2012 Chevrolet Camaro LS, Automatic TransSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.06 OZS. 0.12 L PAG 46 S
Air Cond Refrigerant 1.19 LBS. 0.53 KG R-134a S
Automatic Transmission Fluid Trans Mfr CD 6L50/MYB Complete Trans System 11.40 QTS. 10.78 L Automatic Transmission Fluid DEXRON VI S
Automatic Transmission Fluid Trans Mfr CD 6L50/MYB Overhaul 9.80 QTS. 9.27 L Automatic Transmission Fluid DEXRON VI S
Automatic Transmission Fluid Trans Mfr CD 6L50/MYB Pan Removal & Filter Replacement 6.70 QTS. 6.34 L Automatic Transmission Fluid DEXRON VI S
Brake Fluid N/A N/A DOT 3 Hydraulic Brake Fluid S
Differential Gear Oil w/Limited Slip Differential 1.10 QTS. 1.04 L Synthetic Differential Lubricant GL-5 75W-90 The Limited Slip Additive container capacity is greater than the amount needed. ONLY add amount specified, 0.075l (2.6 oz.). GM Part No. 89021677. S
Differential Gear Oil w/o Limited Slip Differential 1.00 QTS. 0.94 L Synthetic Differential Lubricant GL-5 75W-90 GM Part No. 89021677. S
Engine Coolant V6,Automatic Trans 10.80 QTS. 10.22 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Oil V6 w/Filter 6.00 QTS. 5.67 L API - SAE 5W-30 Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. S
Fuel Tank 18.80 GALS. 71.16 L S
Power Steering Fluid 1.30 QTS. 1.23 L GM Part No. 19329448 Approximate capacity. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.