Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Chevrolet Traverse LS, FWDFACTORY OEM SERVICE PROCEDURE
Fastener Specifications
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Caliper Bleed Valve- Front | 13 N.m | 115 lb in |
| Brake Caliper Bleed Valve- Rear | 7 N.m | 62 lb in |
| Brake Caliper Bracket Bolts- Front | 175 N.m | 129 lb ft |
| Brake Caliper Bracket Bolts- Rear | 175 N.m | 129 lb ft |
| Brake Caliper Guide Pin Bolts- Front Tighten the guide pin bolt closest to the bleed valve first. |
64 N.m | 47 lb ft |
| Brake Caliper Guide Pin Bolts- Rear Tighten the guide pin bolt closest to the bleed valve first. |
27 N.m | 20 lb ft |
| Brake Hose Fitting Bolt- Front | 40 N.m | 30 lb ft |
| Brake Hose Fitting Bolt- Rear | 50 N.m | 37 lb ft |
| Brake Rotor Retention Screw- Front | 12 N.m | 106 lb in |
| Brake Rotor Retention Screw- Rear | 12 N.m | 106 lb in |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
