2011 Chevrolet Traverse LS, FWDFACTORY OEM SERVICE PROCEDURE

Cruise Control Switch Replacement

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cruise Control Switch
GM2823598Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the steering wheel airbag. Refer to Steering Wheel Airbag Replacement .
  2. Remove the steering wheel spoke cover. Refer to Steering Wheel Spoke Cover Replacement .
1 Cruise Control Switch
Procedure 
Use the appropriate tool to depress the tabs and release the switch from the cover.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.