Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Chevrolet CapriceFACTORY OEM SERVICE PROCEDURE
Power Steering Pump Specifications
Power Steering Pump Specifications
| Application | Specification |
|---|---|
| Make | Kayaba |
| Type | Vane type constant flow |
| Pressure @ 1, 000 engine rpm | |
|
7, 580-8, 270 kPa |
|
8, 270-8, 960 kPa |
| Flow | 8 L/pm |
| Drive | Pulley driven by the crankshaft via a drive belt |
| Drive Belt Tension | Self Adjusting |
| Lubrication | |
|
Dexron® VI Automatic Transmission Fluid |
|
EP Semi Fluid Lithium Base O Grease |
| Power Steering Fluid Capacity | |
|
700 ml
IMPORTANT:
Use the power steering fluid level indicator as a final check to make sure the correct refill quantity. |
|
Approx. 650 ml
IMPORTANT:
Use the power steering fluid level indicator as a final check to make sure the correct refill quantity. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.