Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Chevrolet Traverse LS, AWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.50 OZS. | 0.19 L | PAG 46 | S | |||
| Air Cond Refrigerant | 2.30 LBS. | 1.04 KG | R-134a | S | |||
| Automatic Transmission Fluid | Drain and Refill,w/Drain Plug | N/A | N/A | Automatic Transmission Fluid DEXRON VI | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. Fluid Capacity is between: 4.2 to 6.3 qts. | S | |
| Brake Fluid | N/A | N/A | DOT 3 Hydraulic Brake Fluid | S | |||
| Differential Gear Oil | Rear | 0.85 QTS. | 0.8 L | SAE 75W-90 Synthetic Axle Gear Oil | GM Part No. 89021677. | S | |
| Engine Coolant | 11.40 QTS. | 10.78 L | 50/50 mixture of DEX-COOL and clean, drinkable water | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S | ||
| Engine Oil | w/Filter | 5.50 QTS. | 5.2 L | API - SAE 5W-30 | Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. | S | |
| Power Steering Fluid | N/A | N/A | GM Power Steering Fluid GM Part No. 89021184 | If the Steering Gear is replaced: Use Automatic Transmission Fluid DEXRON VI: Refer to GM TSB: PI0620A. | S | ||
| Transfer Case Fluid | 1.06 QTS. | 1 L | SAE 75W-90 Synthetic Axle Gear Oil | GM Part No. 89021677. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.