Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Chevrolet Optra LS, AutomaticFACTORY OEM SERVICE PROCEDURE
Battery Usage (Diesel Engine)
| Description | Specification | |
|---|---|---|
| Unit | Standard | |
| Type | - | Maintenance Free |
| Output (Capacity) | V-AH | 12V-90AH |
| Cold Cranking Amps (CCA) | CCA | 912 |
| Load Test | amps | 450 |
| Minimum Voltage | ||
|
V | 21°C (70°F) and above |
|
V | 15.6°C (60°F) |
|
V | 10°C (50°F) |
|
V | 4.4°C (40°F) |
|
V | -1.1°C (30°F) |
|
V | -6.7°C (20°F) |
|
V | -12.2°C (10°F) |
|
V | -17.8°C (0°F) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.