2008 Chevrolet Chevy Express G2500, Van Cargo Extended, 6.0 KFACTORY OEM SERVICE PROCEDURE

ECM Reprogramming

    IMPORTANT: It is necessary to record Fuel Filter Life before reprogramming. The ECM reprogramming procedure will reset Fuel Filter Life to zero.
  1. Record Fuel Filter Life.
  2. IMPORTANT: Clear any DTCs that may have set after completing the programming procedure.
  3. Enable ECM Reprogramming-Refer to Service Programming System (SPS)Β .
  4. Reset Fuel Filter Life to the recorded value.
  5. Start and idle vehicle.
  6. Using the scan tool, perform the Turbocharger Learn Procedure. Refer to Turbocharger Learn .
  7. Perform a DPF Regeneration Enable. Refer to Exhaust Particulate Filter Cleaning (LMM DPF Service Regeneration) or Exhaust Particulate Filter Cleaning (LMM DPF Regeneration Enable) .
  8. If necessary, perform the following:
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.