Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Chevrolet Impala SSFACTORY OEM SERVICE PROCEDURE
Data Communication Component Views
WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Turn Signal/Multifunction Switch |
| 2 | Steering Wheel Controls - Left |
| 3 | Instrument Panel Cluster (IPC) |
| 4 | Steering Wheel Controls - Right |
| 5 | Windshield Wiper/Washer Switch |
| 6 | Ignition Switch |
| 7 | Hazard Switch |
| 8 | Ambient Light Sensor (C60), Sunload Sensor (C68) |
| 9 | Radio |
| 10 | HVAC Control Module |
| 11 | Inflatable Restraint I/P Module |
| 12 | Traction Control Switch (NW7/NW9), Auxiliary Power Outlet - Front (w/o NW7/NW9) |
| 13 | Transmission Shifter |
| 14 | Cigar Lighter |
| 15 | Horn Buttons/Inflatable Restraint Steering Wheel Module |
| 16 | Data Link Connector (DLC) |
| 17 | Fog Lamp Switch (T96) |
| 18 | Dimmer Switch |
| 19 | Adjustable Pedals Position Switch (JF4) |
| Callout | Component Name |
|---|---|
| 1 | Radio, C1 |
| 2 | Body Control Module (BCM), C2 |
| 3 | HVAC Control Module, C2 |
| 4 | HVAC Control Module, C1 |
| 5 | Inflatable Restraint I/P Module Connector |
| 6 | C207 |
| 7 | G201 |
| 8 | G203 |
| 9 | Body Control Module (BCM), C3 |
| 10 | Body Control Module (BCM), C1 |
| 11 | Body Control Module (BCM) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.