Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Chevrolet Express 1500 RWD V6-4.3LFACTORY OEM SERVICE PROCEDURE
Cruise Control Module: Service and Repair
Cruise Control Module Replacement
Removal Procedure
1. Raise and support the hood.
2. Remove the air cleaner assembly from the vehicle.
* For the 4.3L engine, refer to Air Cleaner Assembly Replacement.
* For the 4.8L, 5.3L, and 6.0L engine, refer to Air Cleaner Assembly Replacement.
3. Disconnect the electrical connector from the cruise control module.
4. Disconnect the cruise control cable from the cruise control module. Refer Cruise Control Cable Replacement.
5. Remove the nuts (2) that retain the cruise control module to the cruise control bracket.
6. Remove the cruise control module (3) from the cruise control bracket (1).
7. Remove the cruise control module (3) from the vehicle.
Installation Procedure
1. Install the cruise control module (3) to the vehicle.
2. Install the cruise control module (3) to the cruise control bracket (1).
Notice: Refer to Fastener Notice.
3. Install the nuts (2) that retain the cruise control module (3) to the cruise control bracket (1).
Tighten the nuts to 5 N.m (44 lb in).
4. Connect the cruise control cable to the cruise control module.
5. Connect the electrical connector to the cruise control module.
6. Install the air cleaner assembly to the vehicle.
* For the 4.3L engine, refer to Air Cleaner Assembly Replacement.
* For the 4.8L, 5.3L, or 6.0L engine, refer to Air Cleaner Assembly Replacement.
7. Close the hood.
8. Refer to Programming and Relearning Programming and Relearning
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.