Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Chevrolet Colorado 2WD L4-2.9LFACTORY OEM SERVICE PROCEDURE
Vehicle Personalization
Vehicle Personalization
Programmable Automatic Door Locks
If the vehicle has power door locks, it is equipped with a feature that enables you to program the power door locks.
In the programming mode, the driver information center (DIC) will display the following features:
* AUTOMATIC LOCKING
* AUTOMATIC UNLOCKING
* REMOTE LOCK FEEDBACK
* REMOTE UNLOCK FEEDBACK
The following instructions detail how to enter the programming mode for the power door lock feature:
1. With the engine OFF, place the ignition in the LOCK position.
2. Press the power door lock switch down for 3 seconds.
3. Press the control stem for more than 2 seconds to view the modes and 1 second to select a mode.
The following is a list of available programming options:
* Mode 1-All doors lock when the vehicle is shifted out of PARK (P) for automatic transmission, or when the vehicle speed is greater than 15 mph (24 km/h) for manual transmission. All doors unlock when the vehicle is shifted into PARK (P) for automatic transmission, or when the key is removed from the ignition for manual transmission.
* Mode 2-All doors lock when the vehicle is shifted out of PARK (P) for automatic transmission, or when the vehicle speed is greater than 15 mph (24 km/h) for manual transmission. Only the drivers door unlocks when the vehicle is shifted into PARK (P) for automatic transmission, or when the key is removed from the ignition for manual transmission.
* Mode 3-All doors lock when the vehicle is shifted out of PARK (P) for automatic transmission, or when the vehicle speed is greater than 15 mph (24 km/h) for manual transmission. None of the doors unlock.
Programmable Remote Lock and Unlock Feedback
The following instructions detail how to enter the programming mode for the remote lock and unlock feedback feature:
1. With the engine OFF, place the ignition in the LOCK position.
2. Place the ignition key in the OFF position or the retained accessory power (RAP) position.
3. Press the key fob LOCK and UNLOCK at the same time. The DIC will display RFA.
4. Press the control stem for more than 2 seconds to view the modes and 1 second to select a mode.
The following is a list of available programming options:
* Mode 1-The park lamps flash when the vehicle is locked and unlocked.
* Mode 2-The park lamps flash and the horn chirps when the vehicle is locked. The park lamps flash when the vehicle is unlocked.
* Mode 3-The park lamps flash and the horn chirps when the vehicle is locked and unlocked.
* Mode 4-The RFA is inactive.
Additional Information
Refer to Power Door Locks Description and Operation for more information about the automatic door lock feature.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.