Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Chevrolet Optra LS, AutomaticFACTORY OEM SERVICE PROCEDURE
Engine Controls Connector End Views
Camshaft Position (CMP) Sensor (HV-240)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK/BK | 1846 | Ignition 1 Voltage |
| 2 | BK/WH | 251 | Low Reference |
| 3 | PU | 633 | Camshaft Position (CMP) Sensor Signal |
Camshaft Position (CMP) Sensor (MR-140)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK/BK | 1846 | Ignition 1 Voltage |
| 2 | BK/WH | 251 | Ground |
| 3 | PU | 633 | Camshaft Position (CMP) Sensor Signal |
Crankshaft Position (CKP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | D-BU/WH | 1869 | Crankshaft Position (CKP) Sensor Signal |
| 2 | YE/BK | 1868 | Low Reference |
| 3 | BK/WH | 51 | Ground |
Engine Coolant Temperature (ECT) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 808 | Low Reference |
| B | L-GN | 410 | Engine Coolant Temperature (ECT) Sensor Signal |
Evaporative Emission (EVAP) Canister Purge Solenoid Valve
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK/BK | 1846 | Ignition 1 Voltage |
| 2 | WH | 428 | Evaporative Emission (EVAP) Canister Purge Solenoid Control |
Exhaust Gas Recirculation (EGR) Valve (MR-140)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | D-GN | 435 | Exhaust Gas Recirculation (EGR) Solenoid Low Control |
| 2 | OG/BK | 469 | Low Reference |
| 3 | WH/BK | 1456 | Exhaust Gas Recirculation (EGR) Valve Position Signal |
| 4 | L-BU/BK | 1688 | 5-Volt Reference |
| 5 | GY | 120 | Fuel Pump Supply Voltage |
Exhaust Gas Recirculation (EGR) Valve (HV-240)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK | 139 | Ignition 1 Voltage |
| 2 | D-GN | 411 | Exhaust Gas Recirculation (EGR) Valve Control |
Fuel Injector 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | YE/BU | 1744 | Fuel Injector 1 Control |
| B | PK | 139 | Ignition 1 Voltage |
Fuel Injector 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BN/WH | 1745 | Fuel Injector 2 Control |
| B | PK | 139 | Ignition 1 Voltage |
Fuel Injector 3
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-GN/BK | 1746 | Fuel Injector 3 Control |
| B | PK | 139 | Ignition 1 Voltage |
Fuel Injector 4
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-GN/WH | 844 | Fuel Injector 4 Control |
| B | PK | 139 | Ignition 1 Voltage |
Fuel Pump
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | D-BU | 1936 | Fuel Level Sensor Signal |
| 2 | BK | 1250 | Ground |
| 3 | GY | 120 | Fuel Pump Supply Voltage |
| 4 | BK | 1250 | Ground |
| 5 | PU | 172 | Low Fuel Indicator Control |
| 6 | PU/BK | 632 | Low Reference |
Heated Oxygen Sensor 1 (HO2S) 1 (MR-140)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | GY | 1653 | Heated Oxygen Sensor (HO2S) 1 Signal |
| 2 | D-GN/RD | 1665 | Heated Oxygen Sensor (HO2S) 1 Low Reference |
| 3 | BN/WH | 1669 | Heated Oxygen Sensor (HO2S) 1 Heater Control |
| 4 | PK/BK | 1846 | Ignition 1 Voltage |
Heated Oxygen Sensor 2 (HO2S2) (MR-140)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PU | 1670 | Heated Oxygen Sensor (HO2S) 2 Signal |
| 2 | PK/BK | 1846 | Ignition 1 Voltage |
| 3 | L-GN | 413 | Heated Oxygen Sensor (HO2S) 2 Low Reference |
| 4 | BN/BK | 1671 | Heated Oxygen Sensor (HO2S) 2 Heater Control |
Idle Air Control (IAC) Valve
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WH | 444 | Idle Air Control (IAC) Coil B Low Control |
| B | PU/WH | 1749 | Idle Air Control (IAC) Coil B High Control |
| C | YE/WH | 1748 | Idle Air Control (IAC) Coil A Low Control |
| D | BN | 1747 | Idle Air Control (IAC) Coil A High Control |
Ignition Coil (IC) Module
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | L-BU | 406 | Ignition Coil (IC) Timing Control (1 and 4) |
| B | PK | 739 | Ignition 1 Voltage |
| C | D-GN/WH | 423 | Ignition Coil (IC) Timing Control (2 and 3) |
Intake Air Temperature (IAT) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | BK | 808 | Low Reference |
| 2 | GY | 472 | Intake Air Temperature (IAT) Sensor Signal |
Knock Sensor (KS)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | YE/BK | 496 | Knock Sensor (KS) Signal |
| 2 | D-BU/WH | 808 | Low Reference |
| 3 | BK/WH | 51 | Ground |
Manifold Absolute Pressure (MAP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | L-BU/BK | 1688 | 5-Volt Reference (MR 140) |
| BN/BK | 5-Volt Reference (HV 240) | ||
| 2 | D-BU/WH | 432 | Manifold Absolute Pressure (MAP) Sensor Signal |
| 3 | OG/BK | 469 | Low Reference |
Octane Selection Switch (HV-240)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PU | 723 | Octane Switch Signal |
| 2 | BK/WH | 51 | Ground |
| 3 | L-BU | 722 | Octane Switch Signal |
Oxygen (O2) Sensor (HV-240)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | GY | 1653 | Oxygen (O2) Sensor Signal |
| B | D-GN/RD | 1665 | Oxygen (O2) Sensor Low Reference |
Rough Road Sensor (MR-140)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | GY | 605 | 5-Volt Reference |
| B | D-GN | 602 | Rough Road Sensor Signal |
| C | PU/WH | 632 | Low Reference |
Throttle Position (TP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-GN/WH | 416 | 5-Volt Reference |
| B | BK | 808 | Low Reference (MR 140) |
| D-BU/WH | Low Reference (HV 240) | ||
| C | GY | 417 | Throttle Position (TP) Sensor Signal |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
