2006 Chevrolet Impala SSFACTORY OEM SERVICE PROCEDURE

BCM Inputs Data List

WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Park Brake Switch

The scan tool displays Applied/Released. When the brake pedal is applied, the scan tool will display applied.

Valet Switch

The scan tool displays Inactive/Active. When activated displays Valet Mode on the uplevel radio and display active on the scan tool.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.