SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSOEM CONNECTOR END VIEWSENGINE CONTROL MODULE (ECM) CONNECTOR END VIEWS (2.4L)ENGINE CONTROL MODULE (ECM) CONNECTOR END VIEWSENGINE CONTROL MODULE (ECM) C3
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Engine Control Module (ECM) C3

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Engine Control Module (ECM) C3
Fig 1: Engine Control Module (ECM) C3 Connector End View
GM1335545Courtesy of GENERAL MOTORS CORP.
Engine Control Module (ECM) C3 Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 15492321
  • Service: 88988361
  • Description: 73-Way F GT 280 Series Micro 64 Sealed (GY)
Terminal Part Information 
  • Pins: 7, 21, 23, 29, 33, 35, 37, 39, 47, 48, 49, 53, 55, 57, 59, 65
  • Terminal/Tray: 33467-0003/23
  • Core/Insulation Crimp: H/H
  • Release Tool/Test Probe: J-38125-213/J-35616-64B (L-BU)
  • Pins: 28, 44
  • Terminal/Tray: 33467-0005/23
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: J-38125-213/J-35616-64B (L-BU)
Engine Control Module (ECM) C3 Terminal Identification

Pin Wire Color Circuit No. Function
1-6 - - Not Used
7 OG 225 Generator Turn On Signal
8-20 - - Not Used
21 BK/WH 2751 Low Reference
22 - - Not Used
23 OG/BK 469 Low Reference
24-27 - - Not Used
28 TN/WH 1704 Low Reference
29 GY/WH 23 Generator Field Duty Cycle Signal
30-32 - - Not Used
33 TN 2501 High Speed GMLAN Serial Data (-)
34 - - Not Used
35 TN 2761 Low Reference
36 - - Not Used
37 GY 2700 5-Volt Reference - 1
38 - - Not Used
39 GY 2704 5-Volt Reference - 1
40-43 - - Not Used
44 L-BU/BK 1688 5-Volt Reference - 2
45-46 - - Not Used
47 D-GN 1433 PNP/Clutch Start Switch Signal (M86)
48 D-GN/WH 428 EVAP Canister Purge Solenoid Control
49 D-GN 335 Low Speed Cooling Fan Relay Control
50-52 - - Not Used
53 TN/BK 2500 High Speed GMLAN Serial Data (+)
54 - - Not Used
55 YE 410 ECT Sensor Signal
56 - - Not Used
57 OG/BK 380 A/C Refrigerant Pressure Sensor Signal
58 - - Not Used
59 L-GN 432 MAP Sensor Signal
60-64 - - Not Used
65 TN/BK 231 Oil Pressure Switch Signal
66-73 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.