SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSOEM CONNECTOR END VIEWSENGINE CONTROL MODULE (ECM) CONNECTOR END VIEWS (2.4L)ENGINE CONTROL MODULE (ECM) CONNECTOR END VIEWSENGINE CONTROL MODULE (ECM) C1
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Engine Control Module (ECM) C1

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Engine Control Module (ECM) C1
Fig 1: Powertrain Control Module (PCM) C1 Connector End View
GM1228485Courtesy of GENERAL MOTORS CORP.
Engine Control Module (ECM) C1 Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 15492320
  • Service: 88988821
  • Description: 56-Way F Micro 64 Series Sealed (BU)
Terminal Part Information 
  • Pins: 16, 35, 37, 41
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
  • Pins: 2, 6, 19, 20, 55
  • Terminal/Tray: 33467-0005/23
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: J-38125-213/J-35616-64B (L-BU)
  • Pins: 7, 9, 12, 13, 18, 33, 34, 36, 40, 44, 47, 48, 49, 53, 54, 56
  • Terminal/Tray: 33467-0003/23
  • Core/Insulation Crimp: H/H
  • Release Tool/Test Probe: J-38125-213/J-35616-64B (L-BU)
Engine Control Module (ECM) C1 Terminal Identification

Pin Wire Color Circuit No. Function
1 - - Not Used
2 PU 420 TCC Brake Switch/Cruise Control Release Signal
3-5 - - Not Used
6 BN/WH 379 CPP Switch Signal
7 L-BU 20 Stop Lamp Switch Signal
8 - - Not Used
9 TN 2759 Low Reference
10-11 - - Not Used
12 BN/WH 419 MIL Control
13 D-GN/WH 465 Fuel Pump Relay Control
14-15 - - Not Used
16 PU 16 VSS Low Signal
17 - - Not Used
18 BN 4 Accessory Voltage
19 PK/BK 1039 Ignition 1 Voltage
20 RD/WH 840 Battery Positive Voltage
21-32 - - Not Used
33 WH/BK 1164 5-Volt Reference - 1
34 GY 2709 5-Volt Reference - 1
35 PU 1272 5-Volt Reference - 1
36 BN 1271 Low Reference
37 tn 1274 Low Reference
38-39 - - Not Used
40 BN 5069 Powertrain relay Control
41 YE 400 VSS High Signal
42-43 - - Not Used
44 PU 1589 Fuel Level Sensor Signal
44-46 - - Not Used
47 D-BU 1161 APP Sensor 1 Signal
48 D-GN 890 Fuel Tank Pressure Sensor Signal
49 L-BU 1162 APP Sensor 2 Signal
50-52 - - Not Used
53 D-GN/WH 459 A/C Compressor Clutch Relay Control
54 D-BU 473 High Speed Cooling Fan Relay Control
55 WH 1310 EVAP Canister Vent Solenoid Control
56 YE 447 Starter Relay Coil Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.