Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Chevrolet Cobalt SS, 4D Sedan, StandardFACTORY OEM SERVICE PROCEDURE
Scan Tool Data List
Body Control Module (BCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON, Engine OFF, and Vehicle is Stationary | |||
| Brake Fluid Level Sensor | BCM Data | Yes/No | OK/Low |
| ETS Switch | BCM Data | On/Off | Off |
Electronic Brake Control Module (EBCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON, Engine OFF, and Vehicle is Stationary | |||
| ABS Active | EBCM Data | Yes/No | No |
| ABS Warning Lamp | EBCM Data | On/Off | Off |
| Ignition Voltage | EBCM Data | Volts | B+ |
| LF Inlet Solenoid Command | EBCM Data | On/Off | Off |
| LF Outlet Solenoid Command | EBCM Data | On/Off | Off |
| LF Wheel Speed Sensor | EBCM Data | mph/km/h | 0 |
| LR Inlet Solenoid Command | EBCM Data | On/Off | Off |
| LR Outlet Solenoid Command | EBCM Data | On/Off | Off |
| LR Wheel Speed Sensor | EBCM Data | mph/km/h | 0 |
| Pump Motor Command | EBCM Data | On/Off | Off |
| Pump Motor Feedback Signal | EBCM Data | On/Off | Off |
| RF Inlet Solenoid Command | EBCM Data | On/Off | Off |
| RF Outlet Solenoid Command | EBCM Data | On/Off | Off |
| RF Wheel Speed Sensor | EBCM Data | mph/km/h | 0 |
| RR Inlet Solenoid Command | EBCM Data | On/Off | Off |
| RR Outlet Solenoid Command | EBCM Data | On/Off | Off |
| RR Wheel Speed Sensor | EBCM Data | mph/km/h | 0 |
| Rough Road Parameter | EBCM Data | g | Varies |
| Solenoid Relay Feedback Signal | EBCM Data | On/Off | On |
| Solenoid Relay Command | EBCM Data | On/Off | On |
| Traction Active Lamp | EBCM Data | On/Off | Off |
| Traction Disabled | EBCM Data | Yes/No | No |
| Traction Off Lamp | EBCM Data | On/Off | Off |
| Vehicle Speed | EBCM Data | mph/km/h | 0 |
Powertrain Control Module (PCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON, Engine OFF, and Vehicle is Stationary | |||
| Torque Request Signal | PCM Data | % | 90 |
| Traction Control Status | PCM Data | Active/Inactive | Inactive |
| Vehicle Speed | PCM Data | mph/km/h | 0 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.