Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
To Remove Owner's Code
(To Deactivate the Theft-Deterrent From the Unlocked Mode, Deterrent Activated):
Important: Either the owners code or the factory backup code can be used to remove the owners code.
Important: The theft-deterrent is already deactivated and no code is stored if the display changes to "- - -".
- Turn the radio OFF. Press and hold push button numbers 1 and 4 for about 6 seconds until the display changes to read SEC.
- Press HR to set the first two digits (0-19) of the code.
- Press MN to set the next two digits (0-99) of the code.
- Press the AM/FM button to enter the code.
Theft-Deterrent is deactivated when "- - -" appears on the display and then the time of day displays.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.