2005 Chevrolet Impala LSFACTORY OEM SERVICE PROCEDURE

Body Control Module (BCM) C7

WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) C7 Connector End View
GM1664505Courtesy of GENERAL MOTORS CORP.
Computer/Integrating Systems Connector End Views

Connector Part Information 
  • OEM: HITPB-28-G-H
  • Service: See Catalog
  • Description: 28-Way F (GY)
Terminal Part Information 
  • Pins: 2
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
  • Pins: 7, 9, 22, 25
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
Body Control Module (BCM) C7

Pin Wire Color Circuit No. Function
1 - - Not Used
2 L-BU 1344 Trunk Release Relay Control
3-6 - - Not Used
7 L-BU/BK 6692 Left Rear Door Lock Motor Unlock Control
8 - - Not Used
9 L-BU/WH 6693 Right Rear Door Lock Motor Unlock Control
10-17 - - Not Used
18 D-GN/L-BU 170 Power Window Master Switch Right Rear Up Signal
19 PU 169 Power Window Master Switch Left Rear Down Signal
20 - - Not Used
21 D-BU 1307 Power Window Master Switch Lockout Signal
22 D-GN 5060 Low Speed GMLAN Serial Data
23-24 - - Not Used
25 PU/WH 1382 LED Dimming Signal
26 PU 171 Power Window Master Switch Right Rear Down Signal
27 L-GN/GY 280 Power Window Master Switch Lockout Right Rear Signal
28 D-GN/RD 168 Power Window Master Switch Left Rear Up Signal
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.