Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Chevrolet Equinox LS, AWDFACTORY OEM SERVICE PROCEDURE
Engine Controls Connectors
Accelerator Pedal Position (APP) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PU | 1272 | Low Reference |
| B | L-BU | 1162 | APP Sensor 2 Signal |
| C | TN | 1274 | 5-Volt Reference - B |
| D | BN | 1271 | Low Reference |
| E | D-BU | 1161 | APP Sensor 1 Signal |
| F | WH/BK | 1164 | 5-Volt Reference - A |
Camshaft Position (CMP) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BN/WH | 633 | CMP Sensor Signal |
| B | BK | 632 | Low Reference |
| C | RD/WH | 631 | 12-Volt Reference |
Crankshaft Position (CKP) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | L-GN | 1867 | 12-Volt Reference |
| B | PU | 574 | Low Reference |
| C | L-BU/BK | 647 | Medium Resolution Engine Speed Signal |
Engine Coolant Temperature (ECT) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG/BK | 469 | Low Reference |
| B | YE | 410 | ECT Sensor Signal |
Evaporative Emissions (EVAP) Canister Purge Solenoid Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK/BK | 5291 | Ignition 1 Voltage |
| B | D-GN/WH | 428 | EVAP Canister Purge Solenoid Control |
Evaporative Emissions (EVAP) Canister Vent Solenoid Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1440 | Battery Positive Voltage |
| B | WH | 1310 | EVAP Canister Vent Solenoid Control |
Exhaust Gas Recirculation (EGR) Valve Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | GY | 435 | Exhaust Gas Recirculation Solenoid Low Control |
| B | TN | 2753 | Low Reference |
| C | BN | 1456 | Exhaust Gas Recirculation Valve Position Signal |
| D | GY | 5047 | 5-Volt Reference |
| E | OG | 1676 | Exhaust Gas Recirculation Solenoid High Control |
Fuel Tank Pressure (FTP) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 2759 | Low Reference |
| B | D-GN | 890 | FTP Sensor Signal |
| C | GY | 2709 | 5-Volt Reference - A |
Fuel Injector 1 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 5292 | Ignition 1 Voltage |
| B | BK | 1744 | Fuel Injector 1 Control |
Fuel Injector 2 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 5292 | Ignition 1 Voltage |
| B | L-GN/BK | 1745 | Fuel Injector 2 Control |
Fuel Injector 3 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 5292 | Ignition 1 Voltage |
| B | PK/BK | 1746 | Fuel Injector 3 Control |
Fuel Injector 4 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 5292 | Ignition 1 Voltage |
| B | L-BU/BK | 844 | Fuel Injector 4 Control |
Fuel Injector 5 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 5292 | Ignition 1 Voltage |
| B | BK/WH | 845 | Fuel Injector 5 Control |
Fuel Injector 6 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 5292 | Ignition 1 Voltage |
| B | YE/BK | 846 | Fuel Injector 6 Control |
Heated Oxygen Sensor (HO2S) 1 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN/WH | 1653 | HO2S 1 Low Signal |
| B | PU/WH | 1665 | HO2 1 High Signal |
| C | GY/WH | 3113 | HO2S 1 Heater Low Control |
| D | PK/BK | 5291 | Ignition 1 Voltage |
Heated Oxygen Sensor (HO2S) 2 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN/WH | 1669 | HO2S 2 Low Signal |
| B | PU/WH | 1668 | HO2S 2 High Signal |
| C | GY/WH | 3122 | HO2S 2 Heater Low Control |
| D | PK/BK | 5291 | Ignition 1 Voltage |
Ignition Control Module (ICM) Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG/WH | 2122 | IC 2 Control |
| B | PU | 2121 | IC 1 Control |
| C | L-BU | 2123 | IC 3 Control |
| D | YE | 2174 | Low Reference |
| E | BK | 450 | Ground |
| F | PK | 39 | Ignition 1 Voltage |
Knock Sensor (KS) 1 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-BU | 496 | Knock Sensor 1 Signal |
| B | GY | 1716 | Knock Sensor 1 Low Reference |
Knock Sensor (KS) 2 Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | L-BU | 1876 | Knock Sensor 2 Signal |
| B | GY | 2303 | Knock Sensor 2 Low Reference |
Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | YE | 492 | Mass Air Flow Sensor Signal |
| B | PK/BK | 5291 | Ignition 1 Voltage |
| C | BK/WH | 451 | Ground |
| D | TN | 472 | Intake Air Temperature Sensor Signal |
| E | TN | 2760 | Low Reference |
Manifold Absolute Pressure (MAP) Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG/BK | 469 | Low Reference |
| B | L-GN | 432 | MAP Sensor Signal |
| C | GY | 2704 | 5-Volt Reference - B |
Throttle Actuator Control (TAC) Module Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | TN | 1274 | 5-Volt Reference - B |
| 2 | PU | 1272 | Low Reference |
| 3 | L-BU | 1162 | APP Sensor 2 Signal |
| 4 | BN | 818 | VSS Signal |
| 5 | - | - | Not Used |
| 6 | L-BU | 20 | Stop Lamp Switch Signal |
| 7 | OG/BK | 1061 | UART Serial Data 2 |
| 8 | BK/WH | 451 | Ground |
| 9-10 | - | - | Not Used |
| 11 | D-BU | 1161 | APP Sensor 1 Signal |
| 12 | BN | 1271 | Low Reference |
| 13 | WH/BK | 1164 | 5-Volt Reference - A |
| 14-15 | - | - | Not Used |
| 16 | TN | 800 | UART Serial Data 1 |
| 17 | BK/WH | 451 | Ground |
| 18 | PK/BK | 5290 | Ignition 1 Voltage |
| 19-20 | - | - | Not Used |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
