2005 Chevrolet Epica LSFACTORY OEM SERVICE PROCEDURE

Lighting Systems Component Views

Fig 1: Identifying Interior Lighting Components
GM1469265Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Vanity Lamp
2 Reading Lamp
3 Sunroof Switch
4 Dome Lamp
5 Front Door Courtesy Lamp
Fig 2: Identifying Front Exterior Lighting Components
GM1480136Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Repeater Lamp
2 Side Marker Lamp
3 Park/Turn Signal Lamp (North America)
3 Turn Signal Lamp (Euro)
4 Head Lamp
5 Fog Lamp
Fig 3: Identifying Rear Compartment Lamp Components
GM1469267Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 License Plate Lamp
2 Center High Mounted Stop Lamp (CHMSL)
3 Tail Lamp, Backup Lamp
4 Rear Compartment Lamp
Fig 4: Identifying Instrument Panel Components
GM1469253Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Shift Program Switch, Hold Mode Switch
2 Cigar Lighter
3 Daytime Running Lamp Module (w/ DRL)
4 Clock
5 Auxiliary Power Outlet
6 Dimmer Control Switch (I/P)/Headlamp Leveling Switch
7 Horn Switch
Fig 5: Identifying Front Dash Electrical Components
GM1469252Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Instrument Cluster
2 Ignition Switch
3 Speaker (Tweeter) Right Front (Left Similar)
4 Radio
5 Shift Indicator Lamp - Automatic Transmission
6 Fog Lamp Switch - Rear (w/ Rear Fog Lamps)
7 Fog Lamp Switch/Front
8 Ashtray Lamp
Fig 6: Identifying Instrument Panel Multifunction Switches
GM1469254Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Traction Control Switch (TCS)
2 Windshield Wiper/Washer Switch
3 Hazard Switch
4 I/P Compartment Lamp/Switch
5 Headlamp Switch, Turn Signal/ Multifunction Switch
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.