2005 Chevrolet Aveo LS, 4D Sedan, StandardFACTORY OEM SERVICE PROCEDURE

Fastener Tightening Specifications

Fastener Tightening Specifications

Application Specification
Metric English
Accessory Mounting Bracket Bolts 37 N.m 27 lb ft
Camshaft Position Sensor Bolts 12 N.m 106 lb in
Crankshaft Position Sensor Retaining Bolt 6.5 N.m 58 lb in
Electronic Ignition System Ignition Coil Retaining Bolts 10 N.m 89 lb in
Engine Control Module Bolts 4 N.m 35 lb in
Engine Coolant Temperature Sensor Bolt 20 N.m 15 lb ft
Evaporative Emission Canister Flange Bolt 20 N.m 15 lb ft
Evaporative Emission Canister Protective Cover 8 N.m 71 lb in
Evaporative Emission Canister Purge Solenoid Bracket Bolt 5 N.m 44 lb in
Evaporative Emission Vent Solenoid Bolt 8.5 N.m 75 lb in
Exhaust Gas Recirculation Valve Retaining Bolts 30 N.m 22 lb ft
Fuel Filter Mounting Bracket Assembly Bolt 4 N.m 35 lb in
Fuel Pressure Regulator Retaining Screw 12 N.m 106 lb in
Fuel Rail Retaining Bolts 25 N.m 18 lb ft
Fuel Tank Retaining Bolts 20 N.m 15 lb ft
Idle Air Control Valve Retaining Bolts 3 N.m 27 lb in
Knock Sensor Bolt 20 N.m 15 lb ft
Manifold Absolute Pressure Sensor Mounting Bracket Bolt 4 N.m 35 lb in
Manifold Absolute Pressure Sensor Retaining Bolts and Nuts 8 N.m 71 lb in
Oxygen Sensor Bolt 42 N.m 31 lb ft
Rear A/C Compressor Mounting Bracket Bolts 35 N.m 26 lb ft
Spark Plug Cover Bolts 3 N.m 27 lb in
Throttle Body Retaining Nuts 15 N.m 11 lb ft
Throttle Position Sensor Retaining Bolts 2 N.m 18 lb in
Variable Geometry Induction System Solenoid 10 N.m 89 lb in
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.