2004 Chevrolet SSRFACTORY OEM SERVICE PROCEDURE

Powertrain Control Module C2 Connector End View

Powertrain Control Module C2 Connector End View

GM73173Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12191110
  • 80-Way F Micro-Pack 100 Series, Sealed (BU)
Pin Wire Color Circuit No. Function
1 BK 450 Ground
2 BN 418 TCC PWM Solenoid Valve Control
3-4 - - Not Used
5 TN/BK 464 Delivered Torque Signal
6 RD/BK 1228 PC Solenoid Valve High Control (Sol.A)
7 - - Not Used
8 L-BU/WH 1229 PC Solenoid Valve Low Control (Sol.A)
9 D-GN/WH 465 Fuel Pump Relay Control
10 WH 121 Engine Speed Signal
11-13 - - Not Used
14 RD/BK 380 A/C Refrigerant Pressure Sensor Signal
15 RD 225 Generator Turn On Signal
16-17 - - Not Used
18 D-GN 1433 PNP Start Switch Signal
19 - - Not Used
20 L-GN/BK 822 VSS Low Reference
21 PU/WH 821 VSS High Signal
22-24 - - Not Used
25 TN 472 IAT Sensor Signal
26 PU 2121 Ignition Control 1
27 RD 2127 Ignition Control 7
28 L-BU/WH 2126 Ignition Control 6
29 D-GN/WH 2124 Ignition Control 4
30 - - Not Used
31 YE 492 MAF Sensor Signal
32 L-GN 432 MAP Sensor Signal
33 D-BU 473 High Speed Cooling Fan Relay Control
34 D-GN/WH 428 EVAP Canister Purge Solenoid Control
35-38 - - Not Used
39 RD 631 12 Volt Reference
40 BK 450 Ground
41 - - Not Used
42 TN/BK 422 TCC Solenoid Valve Control
43 D-GN/WH 459 A/C Compressor Clutch Relay Control
44 - - Not Used
45 WH 1310 EVAP Canister Vent Solenoid Control
46 BN/WH 419 MIL Control
47 YE/BK 1223 2-3 Shift Solenoid Valve Control
48 D-GN 1222 1-2 Shift Solenoid Valve Control
49 YE/BK 1827 Vehicle Speed Signal
50 D-GN/WH 817 Vehicle Speed Signal
51 YE/BK 1227 TFT Sensor Signal
52 BN 2391 HO2S Heater Low Control Bank 1 Sensor 2
53 RD/WH 3223 HO2S Heater Low Control Bank 2 Sensor 2
54 PU/WH 1589 Fuel Level Sensor Signal
55-56 - - Not Used
57 BK 2760 Low Reference
58 TN/WH 332 Oil Pressure Sensor Signal
59 PU 806 Crank Voltage
60 BN 2129 Low Reference
61 BN/WH 2130 Low Reference
62 GY 773 Transmission Range Switch Signal C
63 PK 1224 Transmission Fluid Pressure Switch A Signal
64 D-GN 890 Fuel Tank Pressure Sensor Signal
65 - - Not Used
66 PU 2128 Ignition Control 8
67 RD/WH 2122 Ignition Control 2
68 D-GN 2125 Ignition Control 5
69 L-BU 2123 Ignition Control 3
70-71 - - Not Used
72 BK/WH 3113 HO2S Heater Low Control Bank 1 Sensor 1
73 - - Not Used
74 L-GN 3212 HO2S Heater Low Control Bank 2 Sensor 1
75 GY 23 Generator Field Duty Cycle Signal
76-79 - - Not Used
80 BK 2751 Low Reference
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.