Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Chevrolet S10 PickupFACTORY OEM SERVICE PROCEDURE
Control Module References
WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
Control Module References
| Control Module | Repair Instructions | Diagnostic System Check/Starting Point | Schematic |
|---|---|---|---|
| Body Control Module (BCM) | Refer to Body Control Module Replacement | Refer to Diagnostic Starting Point - Body Control System | Refer to Body Control System Schematics |
| Driver Information Center (DIC) | Refer to Driver Information Center Module Replacement in Instrument Panel, Gages and Console | Refer to Diagnostic Starting Point - Instrument Panel, Gages and Console in Instrument Panel, Gages and Console | Refer to Driver Information System Schematics in Instrument Panel, Gages and Console |
| Electronic Brake Control Module (EBCM) | Refer to Electronic Brake Control Module Replacement in Antilock Brake System | Refer to Diagnostic System Check - ABS in Antilock Brake System | Refer to ABS Schematics in Antilock Brake System |
| Inflatable Restraint Sensing and Diagnostic Module (SDM) | Refer to Inflatable Restraint Sensing and Diagnostic Module Replacement in SIR | Refer to Diagnostic System Check - SIR in SIR | Refer to SIR Schematics in SIR |
| Instrument Panel Cluster (IPC) | Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gages and Console | Refer to Diagnostic System Check - Instrument Cluster in Instrument Panel, Gages and Console | Refer to Instrument Cluster Schematics in Instrument Panel, Gages and Console |
| Powertrain Control Module (PCM) | Refer to Powertrain Control Module (PCM) Replacement in Engine Controls - 4.3L | Refer to Diagnostic System Check - Engine Controls in Engine Controls - 4.3L | Refer to Engine Controls Schematics in Engine Controls - 4.3L |
| Transfer Case Shift Control Module (TCSCM) | Refer to Transfer Case Shift Control Module Replacement in Transfer Case - NVG 136-NP4 (One Speed Automatic) | Refer to Diagnostic System Check - Transfer Case in Transfer Case-NVG 136-NP4 (One Speed Automatic) | Refer to Transfer Case Control Schematics in Transfer Case-NVG 136-NP4 (One Speed Automatic) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.