Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Chevrolet Malibu Maxx LSFACTORY OEM SERVICE PROCEDURE
Engine Controls Connector End Views
Engine Controls Connector End Views - Accelerator Pedal Position (APP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PU | 1272 | Low Reference |
| B | L-BU | 1162 | APP Sensor 2 Signal |
| C | TN | 1274 | 5-Volt Reference |
| D | BN | 1271 | Low Reference |
| E | D-BU | 1161 | APP Sensor 1 Signal |
| F | WH/BK | 1164 | 5-Volt Reference |
Engine Controls Connector End Views - Camshaft Position (CMP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BN/WH | 633 | CMP Sensor Signal |
| B | BK | 407 | Low Reference |
| C | RD/WH | 812 | 12-Volt Reference |
Engine Controls Connector End Views - Crankshaft Position (CKP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | L-GN | 1867 | 12-Volt Reference |
| B | PU | 574 | Low Reference |
| C | L-BU/BK | 647 | Medium Resolution Engine Speed Signal |
Engine Controls Connector End Views - Engine Coolant Temperature (ECT) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG/BK | 469 | Low Reference |
| B | YE | 410 | ECT Sensor Signal |
Engine Controls Connector End Views - Evaporative Emission (EVAP) Canister Purge Solenoid
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK/BK | 5291 | Ignition 1 Voltage |
| B | D-GN/WH | 428 | EVAP Canister Purge Solenoid Control |
Engine Controls Connector End Views - Evaporative Emission (EVAP) Canister Vent Solenoid
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | RD/WH | 1540 | Battery Positive Voltage |
| B | WH | 1310 | EVAP Canister Vent Solenoid Control |
Engine Controls Connector End Views - Exhaust Gas Recirculation (EGR) Valve
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | GY | 435 | EGR Solenoid Low Control |
| B | TN | 2753 | Low Reference |
| C | BN | 1456 | EGR Valve Position Signal |
| D | GY | 5047 | 5-Volt Reference |
| E | OG | 1676 | EGR Solenoid High Control |
Engine Controls Connector End Views - Fuel Injector 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 639 | Ignition 1 Voltage |
| B | BK | 1744 | Fuel Injector 1 Control |
Engine Controls Connector End Views - Fuel Injector 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 639 | Ignition 1 Voltage |
| B | L-GN/BK | 1745 | Fuel Injector 2 Control |
Engine Controls Connector End Views - Fuel Injector 3
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 639 | Ignition 1 Voltage |
| B | PK/BK | 1746 | Fuel Injector 3 Control |
Engine Controls Connector End Views - Fuel Injector 4
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 639 | Ignition 1 Voltage |
| B | L-BU/BK | 844 | Fuel Injector 4 Control |
Engine Controls Connector End Views - Fuel Injector 5
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 639 | Ignition 1 Voltage |
| B | BK/WH | 845 | Fuel Injector 5 Control |
Engine Controls Connector End Views - Fuel Injector 6
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 639 | Ignition 1 Voltage |
| B | YE/BK | 846 | Fuel Injector 6 Control |
Engine Controls Connector End Views - Fuel Pump and Sender Assembly
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | GY | 120 | Fuel Pump Supply Voltage |
| 2 | PU | 1589 | Fuel Level Sensor Signal |
| 3 | BK/WH | 651 | Ground |
| 4 | BK | 1250 | Ground |
Engine Controls Connector End Views - Fuel Tank Pressure (FTP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK/WH | 469 | Low Reference |
| B | PU | 890 | Fuel Tank Pressure Sensor Signal |
| C | GY | 705 | 5-Volt Reference |
Engine Controls Connector End Views - Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN/WH | 3111 | HO2S Low Reference (Bank 1 Sensor 1) |
| B | PU/WH | 3110 | HO2S Reference Voltage (Bank 1 Sensor 1) |
| C | GY/WH | 3113 | HO2S Heater Low Control (Bank 1 Sensor 1) |
| D | PK/BK | 5291 | Ignition 1 Voltage |
Engine Controls Connector End Views - Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN/WH | 3211 | HO2S Low Reference (Bank 2 Sensor 1) |
| B | PU/WH | 3210 | HO2S Reference Voltage (Bank 2 Sensor 1) |
| C | L-GN | 3212 | HO2S Heater Low Control (Bank 2 Sensor 1) |
| D | PK/BK | 5291 | Ignition 1 Voltage |
Engine Controls Connector End Views - Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN/WH | 3121 | HO2S Low Signal (Bank 1 Sensor 2) |
| B | PU | 3120 | HO2S High Signal (Bank 1 Sensor 2) |
| C | GY/WH | 3122 | HO2S Heater Low Control (Bank 1 Sensor 2) |
| D | PK/BK | 5291 | Ignition 1 Voltage |
Engine Controls Connector End Views - Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN | 3221 | HO2S Low Signal (Bank 2 Sensor 2) |
| B | PU | 3220 | HO2S High Signal (Bank 2 Sensor 2) |
| C | OG/WH | 3223 | HO2S Heater Low Control (Bank 2 Sensor 2) |
| D | PK/BK | 5291 | Ignition 1 Voltage |
Engine Controls Connector End Views - Ignition Control Module (ICM)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG/WH | 2122 | IC 2 Control |
| B | PU | 2121 | IC 1 Control |
| C | L-BU | 2123 | IC 3 Control |
| D | YE | 2174 | Low Reference |
| E | BK | 450 | Ground |
| F | PK | 239 | Ignition 1 Voltage |
Engine Controls Connector End Views - Knock Sensor (KS) 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-BU | 496 | Knock Sensor 1 Signal |
| B | GY | 1716 | Low Reference |
Engine Controls Connector End Views - Knock Sensor (KS) 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | L-BU | 1876 | Knock Sensor 2 Signal |
| B | GY | 2303 | Low Reference |
Engine Controls Connector End Views - Manifold Absolute Pressure (MAP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG | 469 | Low Reference |
| B | L-GN | 432 | MAP Sensor Signal |
| C | GY | 2704 | 5-Volt Reference |
Engine Controls Connector End Views - Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | YE | 492 | MAF Sensor Signal |
| B | PK/BK | 5291 | Ignition 1 Voltage |
| C | BK/WH | 451 | Ground |
| D | TN | 472 | IAT Sensor Signal |
| E | TN/BK | 2760 | Low Reference |
Engine Controls Connector End Views - Throttle Actuator Control (TAC) Module
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | TN | 1274 | 5-Volt Reference |
| 2 | PU | 1272 | Low Reference |
| 3 | L-BU | 1162 | APP Sensor 2 Signal |
| 4 | BN | 818 | Vehicle Speed Signal |
| 5 | - | - | Not Used |
| 6 | WH | 17 | Stop Lamp Switch Signal |
| 7 | TN | 800 | UART Serial Data (Primary) |
| 8 | BK/WH | 451 | Ground |
| 9-10 | - | - | Not Used |
| 11 | D-BU | 1161 | APP Sensor 1 Signal |
| 12 | BN | 1271 | Low Reference |
| 13 | WH/BK | 1164 | 5-Volt Reference |
| 14-15 | - | - | Not Used |
| 16 | OG/BK | 1061 | UART Serial Data (Secondary) |
| 17 | BK/WH | 451 | Ground |
| 18 | PK/BK | 5290 | Ignition 1 Voltage |
| 19-20 | - | - | Not Used |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
