Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Chevrolet Epica LSFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 1.65 LBS. | 0.74 KG | R-134a | S | |||
| Automatic Transmission Fluid | Drain Plug Only | 4.20 QTS. | 3.97 L | Automatic Transaxle Fluid ESSO LT 71141 or ISU H50235 | S | ||
| Automatic Transmission Fluid | Overhaul | 7.80 QTS. | 7.38 L | Automatic Transaxle Fluid ESSO LT 71141 or ISU H50235 | S | ||
| Automatic Transmission Fluid | Pan Removal | 4.20 QTS. | 3.97 L | Automatic Transaxle Fluid ESSO LT 71141 or ISU H50235 | S | ||
| Brake Fluid | N/A | N/A | Delco Supreme 11 Brake Fluid or equivalent DOT 3 Brake Fluid | S | |||
| Engine Coolant | 8.50 QTS. | 8.04 L | 50/50 mixture of clean drinkable water (preferably distilled) and good quality Ethylene Glycol Base Coolant | S | |||
| Engine Oil | w/Filter | 6.80 QTS. | 6.43 L | ILSAC GF-III (API SL), SAE 5W-30, 10W-30 | GM Standard GM6094M and displays the American Petroleum Institute Certified for Gasoline Engines starburst symbol. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. | S | |
| Engine Oil | w/o Filter | 6.40 QTS. | 6.05 L | ILSAC GF-III (API SL), SAE 5W-30, 10W-30 | GM Standard GM6094M and displays the American Petroleum Institute Certified for Gasoline Engines starburst symbol. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. | S | |
| Fuel Tank | N/A | N/A | S | ||||
| Power Steering Fluid | 1.20 QTS. | 1.13 L | Automatic Transmission Fluid DEXRON-III | S | |||
| Windshield Washer Fluid | N/A | N/A | Optikleen Washer Solvent | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.