2004 Chevrolet ClassicFACTORY OEM SERVICE PROCEDURE

Engine Block - Front View

Fig 1: Engine Block - Front View
GM524532Courtesy of GENERAL MOTORS CORP.
Engine Block - Front View

Service Call Out Thread Size Insert Drill Counterbore Tool Tap Driver Drill Depth (Maximum) Tap Depth (Maximum)
J 42385- MM (IN) MM (IN)
1 M10 x 1.5 215 211 212 213 214 24.5 0.96 19.5 0.77
2 M8 x 1.25 210 206 207 208 209 23.5 0.93 18.5 0.73
3 M12 x 1.75 855 856 857 858 859 33.5 1.32 26.5 1.04
4 M8 x 1.25 210 206 207 208 209 23.5 0.93 18.5 0.73
5 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
6 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
7 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
8 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
9 M8 x 1.25 210 206 207 208 209 25.5 1.00 THRU
10 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
11 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
12 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
13 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
14 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
15 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
16 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
17 M6 x 1 205 201 202 203 204 20 0.787 16 0.63
18 M8 x 1.25 210 206 207 208 209 23.5 0.93 18.5 0.73
19 M8 x 1.25 210 206 207 208 209 55 2.17 THRU
20 M8 x 1.25 210 206 207 208 209 23.5 0.93 18.5 0.73
21 M12 x 1.75 855 856 857 858 859 33.5 1.32 26.5 1.04
22 M12 x 1.75 855 856 857 858 859 33.5 1.32 26.5 1.04
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.