2004 Chevrolet Avalanche 2500FACTORY OEM SERVICE PROCEDURE

Fuel Sender Assembly

Fig 1: Identifying Fuel Sender Assembly
GM1244325Courtesy of GENERAL MOTORS CORP.

The fuel sender assembly on single tank applications consists of the following major components:

  • The fuel level sensor
  • The fuel tank pressure (FTP) sensor
  • The fuel tank fuel pump module
  • The fuel strainer
  • The fuel filter
Fig 2: Identifying Fuel Sender Assembly
GM1244325Courtesy of GENERAL MOTORS CORP.

The front fuel sender on dual tank applications consists of the following major components:

  • The fuel level sensor
  • The fuel tank fuel pump module
  • The fuel strainer
  • The fuel filter
Fig 3: Secondary Fuel Sender
GM645600Courtesy of GENERAL MOTORS CORP.

The secondary fuel sender on dual tank applications consists of the following major components:

  • The fuel level sensor (4)
  • The FTP sensor (1)
  • The rear fuel pump (2)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.