Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Description
PCM turns on the in-tank fuel pump when ignition is on. The fuel pump will remain on as long as engine is cranking or running and PCM is receiving ignition reference pulses. If there are no ignition reference pulses, PCM will turn the fuel pump off 2 seconds after ignition is turned on or 2 seconds after engine stops running. The fuel pump is attached to fuel sender assembly and is designed to provide fuel at a pressure above the pressure needed by the fuel injectors. A fuel pressure regulator, attached to fuel rail, keeps fuel available to fuel injectors at a regulated pressure. Unused fuel is returned to fuel tank by a separate fuel return pipe.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.