Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Chevrolet SSR V8-5.3L VIN PFACTORY OEM SERVICE PROCEDURE
Feature Programming - Traction Control Automatic Engagement
Programming the Traction Control Automatic
Engagement Feature
The automatic engagement feature may be programmed so that the Traction Control System (TCS) activates or does not activate automatically at the start of each ignition cycle. In order to change the status of the automatic engagement feature, perform the following procedure:
Important: Failure to follow the correct procedure may cause DTC C0283 to set in Electronic Brake Control Module (EBCM) memory.
1. Park the vehicle and apply the parking brake.
2. Unlock the ignition and shift the transmission into NEUTRAL (N).
3. Turn the ignition ON, with the engine OFF.
4. Press and hold the brake pedal and the accelerator pedal.
5. Press and hold the traction assist switch for 5 seconds.
6. Release the brake and accelerator pedals and the traction control switch,
7. Turn the ignition OFF.
Engagement Feature
The automatic engagement feature may be programmed so that the Traction Control System (TCS) activates or does not activate automatically at the start of each ignition cycle. In order to change the status of the automatic engagement feature, perform the following procedure:
Important: Failure to follow the correct procedure may cause DTC C0283 to set in Electronic Brake Control Module (EBCM) memory.
1. Park the vehicle and apply the parking brake.
2. Unlock the ignition and shift the transmission into NEUTRAL (N).
3. Turn the ignition ON, with the engine OFF.
4. Press and hold the brake pedal and the accelerator pedal.
5. Press and hold the traction assist switch for 5 seconds.
6. Release the brake and accelerator pedals and the traction control switch,
7. Turn the ignition OFF.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.