2003 Chevrolet SSR V8-5.3L VIN PFACTORY OEM SERVICE PROCEDURE

Memory Positioning Module: Service and Repair



MEMORY SEAT CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the seat from the vehicle.

Factory service manual diagram



2. Disconnect the 4 electrical connectors (2) from the memory seat control module (1).

Factory service manual diagram



3. Remove the screw (1) that secures the memory seat control module to the seat.
4. Remove the memory seat control module from the seat.

INSTALLATION PROCEDURE

Factory service manual diagram



1. Position the memory seat control module in the mounting bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the screw (1) securing the memory module to the seat.

Tighten the memory seat control module screw to 1.5 N.m (13 lb in).

Factory service manual diagram



3. Connect the 4 electrical connectors (2) to the memory seat control module (1).
4. Install the seat in the vehicle.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.