2003 Chevrolet Impala LSFACTORY OEM SERVICE PROCEDURE

Fastener Tightening Specifications

Fastener Tightening Specifications

Application Specification
Metric English
Front Bumper Fascia Lower Screws (Impala) 2 N.m 18 lb in
Front Bumper Fascia Lower Screws (Monte Carlo) 2 N.m 18 lb in
Front Bumper Fascia Lower Support Screws (Impala) 2 N.m 18 lb in
Front Bumper Fascia Lower Support Screws (Monte Carlo) 2 N.m 18 lb in
Front Bumper Fascia Support Bracket (Center Support) Bolts 10 N.m 89 lb in
Front Bumper Fascia Support Bracket (Front) Bolt 10 N.m 89 lb in
Front Bumper Fascia to Fender Nuts (Impala) 6 N.m 53 lb in
Front Bumper Fascia to Fender Nuts (Monte Carlo) 6 N.m 53 lb in
Front Bumper Fascia Upper Support Bolts (Impala) 10 N.m 89 lb in
Front Bumper Fascia Upper Support Bolts (Monte Carlo) 10 N.m 89 lb in
Front Bumper Impact Bar at Frame Bolts (Impala) 25 N.m 18 lb ft
Front Bumper Impact Bar at Frame Bolts (Monte Carlo) 25 N.m 18 lb ft
Front Fender Liner to Fascia Screws 2 N.m 18 lb in
Hood Latch Support Bracket Bolts 10 N.m 89 lb in
Rear Bumper Fascia Extension Screw (Monte Carlo) 2 N.m 18 lb in
Rear Bumper Fascia Extension Screw Lower (Monte Carlo) 2 N.m 18 lb in
Rear Bumper Fascia Outer Retainer Bolt (Impala) 6 N.m 53 lb in
Rear Bumper Fascia Outer Retainer Bolt (Monte Carlo) 6 N.m 53 lb in
Rear Bumper Fascia Outer Retainer Nut (Impala) 6 N.m 53 lb in
Rear Bumper Fascia Outer Retainer Nut (Monte Carlo) 6 N.m 53 lb in
Rear Bumper Fascia Splash Shield Bolts 2 N.m 18 lb in
Rear Bumper Fascia Splash Shield Nuts 2 N.m 18 lb in
Rear Bumper Impact Bar at Frame Bolts (Impala) 25 N.m 18 lb ft
Rear Bumper Impact Bar at Frame Bolts (Monte Carlo) 25 N.m 18 lb ft
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.