2002 Chevrolet Venture PlusFACTORY OEM SERVICE PROCEDURE

Sentry Key Immobilizer Module Programming

    NOTE: If the PCM and the SKIM are replaced at the same time, program the VIN into the PCM first. All vehicle keys will then need to be replaced and programmed to the new SKIM.
  1. Turn the ignition on (transmission in Park/Neutral).
  2. Use the DRBIII® and select THEFT ALARM, SKIM then MISCELLANEOUS.
  3. Select SKIM MODULE REPLACEMENT (GASOLINE).
  4. Program the vehicle 4-digit PIN into the SKIM.
  5. Select COUNTRY CODE and enter the correct country.
  6. NOTE: Be sure to enter the correct country code. If the incorrect country code is programmed into SKIM, the SKIM must be replaced.
  7. Select UPDATE VIN (the SKIM will learn the VIN from the PCM).
  8. Press ENTER to transfer the VIN (the PCM will send the VIN to the SKIM)
  9. The DRBIII® will ask if you want to transfer the secret key. Select ENTER to transfer secret key from the PCM. This will ensure the current vehicle ignition keys will still operate the SKIS.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.