Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002VENTURE LT, AWDREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMENGINE CONTROLS SELF-DIAGNOSTICSDIAGNOSTIC TESTSDTC P1106: MAP SYSTEM PERFORMANCECONDITIONS FOR RUNNING DTC
2002 Chevrolet Venture LT, AWD
Conditions For Running DTC
2002 Chevrolet Venture LT, AWDSECTION Conditions For Running DTC
- DTCs P0121, P0122, or P0123 are not set.
- The engine has been running for a period of time that is determined by the start-up coolant temperature. The time ranges from 2 minutes at less than -22°F (-30°C) to 1 second at more than 86°F (30°C).
- The throttle angle is less than 2 percent when the engine speed is less than 3000 RPM; or the throttle angle is less than 30 percent when the engine speed is more than 3000 RPM.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.