2002 Chevrolet Impala LSFACTORY OEM SERVICE PROCEDURE

Engine Block Plug Installation

WARNING: This page is about a different car, the 2002 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the threaded oil gallery plugs.

    Tighten:Β 

    Tighten the oil gallery plugs to 30 N.m (22 lb ft)Β 

    Fig 1: Threaded Oil Gallery Plugs
    G01764591Courtesy of GENERAL MOTORS CORP.
  2. Install the remaining oil gallery plugs using GM P/N United States 12346004, GM P/N Canada 10953480 or the equivalent.
    Fig 2: Oil Gallery Plugs
    G01764592Courtesy of GENERAL MOTORS CORP.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.