SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002IMPALA LSREPAIR AND DIAGNOSISENGINE PERFORMANCESPECIFICATIONSENGINE CONTROL SYSTEM - SERVICE & ADJUSTMENT SPECIFICATIONSIGNITION SYSTEMHIGH TENSION WIRE RESISTANCE
2002 Chevrolet Impala LS

High Tension Wire Resistance

2002 Chevrolet Impala LSSECTION High Tension Wire Resistance
HIGH TENSION WIRE RESISTANCE

Application Ohms
1.9L 1500-15,000 Per Ft.
2.2L
"J" Body
Cavalier & Sunfire (1)
Saturn ("L" Series) (2)
"N" Body (2)
3.1L 3000 Per Ft.
3.4L
Except Impala & Monte Carlo 3000 Per Ft.
Impala & Monte Carlo 600 Per Ft.
3.8L
Except Police 3000 Per Ft.
Police 600 Per Ft.
5.7L 700 Per Ft.
All Others (2)
(1) Vehicles identified with 8th VIN character "F", are not equipped with high tension wires. Ignition coils are connected directly to spark plugs by boots. On vehicles identified with 8th VIN character "4", resistance is 12,000 ohms per foot.
(2) Not equipped with high tension wires. Ignition coils are connected directly to spark plugs by boots.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.