Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Installation Procedure
2002 Chevrolet Impala LSSECTION Installation Procedure
- Install the traction control switch (1) to the IP cluster trim plate (2).
- Connect the electrical connector (1) to the traction control switch (2).
- Align and carefully press the IP cluster trim plate into the IP trim pad. Make sure all of the retainers are fully engaged.
- Install the LH IP cluster trim plate screws. Tighten the IP cluster trim plate screws to 2 N.m (18 lb in).
- Install the LH instrument panel (IP) fuse block access opening covers.
- Install the ignition switch cylinder bezel.
- Return the steering wheel to the original position.
- If equipped with a column shift, position the transaxle shift control indicator to Park.
- If equipped with column shift, release the parking brake.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.