2002 Chevrolet Impala LSFACTORY OEM SERVICE PROCEDURE

With Scan Tool

NOTE: This procedure requires a Tech 2 scan tool and a techline terminal with current Service Programming System (SPS) software.
  1. Connect Tech 2 scan tool to vehicle. Select REQUEST INFORMATION under SERVICE PROGRAMMING menu. Disconnect Tech 2 from vehicle and connect to techline terminal.
  2. On techline terminal, select THEFT MODULE RE-LEARN under SERVICE PROGRAMMING menu. Disconnect Tech 2 from techline terminal and connect to vehicle. Turn ignition switch to RUN position.
  3. Select VTD RE-LEARN under SERVICE PROGRAMMING menu. Attempt to start engine, then release key to RUN position (vehicle should not start).
  4. Observe SECURITY indicator. After approximately 10 minutes indicator will turn OFF. Vehicle is now ready to relearn Passlock(tm) sensor data code and/or password on next ignition switch transition from OFF to CRANK position.
  5. Turn ignition switch to OFF position, and wait 5 seconds. Start engine. Vehicle has now learned password. Using scan tool, clear any DTCs.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.