Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Chevrolet Cutaway 8.1 GFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | w/o Rear AC | 8.00 OZS. | 0.23 L | PAG 150 | S | ||
| Air Cond Compressor Oil | w/Rear A/C | 11.00 OZS. | 0.32 L | PAG 150 | S | ||
| Air Cond Refrigerant | Front & Rear | 3.50 LBS. | 1.58 KG | R-134a | S | ||
| Air Cond Refrigerant | Front | 2.00 LBS. | 0.9 KG | R-134a | S | ||
| Automatic Transmission Fluid | 5.00 QTS. | 4.73 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 8.1L Eng | w/o Rear Heater | 23.00 QTS. | 21.76 L | 50/50 mixture of DEX-COOL and clean, drinkable water | S | |
| Engine Coolant | 8.1L Eng | w/Rear Heater | 26.00 QTS. | 24.6 L | 50/50 mixture of DEX-COOL and clean, drinkable water | S | |
| Engine Oil | 8.1L Eng | 6.50 QTS. | 6.15 L | API - SAE 5W-30 | SAE 5W-30 is best for your vehicle. However, use 10W-30 if the outside temperature is higher than 18Deg.C (0Deg.F). Do not use other viscosity oils, such as SAE 20W-50. If your vehicle is operated in an area where the temperature falls below -29Deg.C (-20Deg.F), consider using a SAE 0W-40 oil, it will provide easier cold starting and better protection for the engine at extremely low temperatures. | S | |
| Fuel Tank | 139 IN. WB | 33.00 GALS. | 124.91 L | S | |||
| Fuel Tank | 159 IN. WB | 57.00 GALS. | 215.76 L | S | |||
| Fuel Tank | 177 IN. WB | 57.00 GALS. | 215.76 L | S | |||
| Power Steering Fluid | N/A | N/A | GM Power Steering Fluid | GM Part No. 89021184. | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
