2002 Chevrolet Avalanche 1500, RWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/o Rear AC 8.00 OZS. 0.23 L PAG 46 S
Air Cond Compressor Oil w/Rear A/C 11.00 OZS. 0.32 L PAG 46 S
Air Cond Refrigerant 1.76 LBS. 0.79 KG R-134a S
Automatic Transmission Fluid 5.3L Eng Drain and Refill 5.00 QTS. 4.73 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid 5.3L Eng Overhaul 11.20 QTS. 10.59 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil 1500 Rear N/A N/A SAE 75W-90 Synthetic Gear Oil The proper level for the 1500 Series is from 5/8" to 1 5/8" below the bottom of the filler plug hole. S
Differential Gear Oil Front N/A N/A SAE 80W-90 Gear Oil When the differential is cold, add enough lubricant to raise the level to 1/2" below the filler plug hole. When the differential is at operating temperature, add enough lubricant to raise the level to the bottom of the filler plug hole. S
Engine Coolant 5.3L Eng 16.50 QTS. 15.61 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Oil 5.3L Eng 6.00 QTS. 5.67 L API - SAE 5W-30 S
Fuel Tank 1500 31.00 GALS. 117.34 L S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 89021184. S
Transfer Case Fluid 2.00 QTS. 1.89 L AUTO TRAK II Fluid Add enough lubricant to raise the level to the bottom of the filler plug hole. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.