SYS.OK|MANUAL.DB● LIVE
2001 Chevrolet Venture Base, Van Cargo Extended

Quick Lookups: Fluids

2001 Chevrolet Venture Base, Van Cargo ExtendedSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/o Rear AC 7.00 OZS. 0.2 L PAG 46 S
Air Cond Compressor Oil w/Rear A/C 8.00 OZS. 0.23 L PAG 46 S
Air Cond Refrigerant Front & Rear 2.20 LBS. 0.99 KG R-134a S
Air Cond Refrigerant Front 1.66 LBS. 0.75 KG R-134a S
Automatic Transmission Fluid Overhaul 10.00 QTS. 9.46 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid Pan Removal and Replacement 7.40 QTS. 7 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid GM Part No. 12378514. S
Engine Coolant Rear Climate Control 11.90 QTS. 11.26 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Coolant w/Air Cond 9.60 QTS. 9.08 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Oil w/Filter 4.50 QTS. 4.25 L API - SAE 5W-30 (Preferred) (Below 0Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) S
Fuel Tank Optional/Extended 25.50 GALS. 96.52 L S
Fuel Tank Standard/Regular 20.00 GALS. 75.7 L S
Power Steering Fluid 1.00 PTS. 0.47 L GM Power Steering Fluid S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.