2001 Chevrolet Venture Base, Van Cargo ExtendedFACTORY OEM SERVICE PROCEDURE

10-Minute Learn Procedure

NOTE: Ensure latest Techline® Service Programming System (SPS) software is used.
  1. Connect Tech 2 scan tool to DLC. Turn ignition on, with engine off. Ensure accessories are off.
  2. Using scan tool, select "Request Information" under Service Programming and follow on-screen instructions.
  3. Disconnect scan tool from vehicle and connect it to a Techline® terminal.
  4. Using Techline® terminal, select "Service Programming System" and follow on-screen instructions.
  5. Disconnect scan tool from Techline® terminal and connect scan tool to vehicle.
  6. Using PassKey III® master key, turn ignition on, with engine off.
  7. Using scan tool, select "Program ECU" under Service Programming System.
  8. Leave scan tool connected for the duration of the 10-minute relearn procedure.
    9. NOTE: SECURITY indicator light may stay on during this process.
  9. Observe scan tool. After about 10 minutes, "PROGRAMMING SUCCESSFUL, TURN OFF IGNITION" should be displayed. Vehicle is now ready to relearn key information and/or passwords on the next ignition switch transition from off to on.
  10. Turn ignition off and wait 5 minutes.
  11. Using PassKey III® master key, start engine. The theft deterrent control module has now learned the key transponder information and PCM has now learned the fuel continue password.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.